CJX2 AC Contactors
CJX2 series AC contactors (hereinafter referred to as Contactors) are mainly used for AC 50 Hz (or 60 Hz), rated working voltage to 690 V, rated working current to 95 A under AC-3, 400 (380) V use category, For remote connection and breaking circuit, frequent starting and control of AC motor, and can form electromagnetic starter with appropriate thermal relay to protect possible operation Overload circuit.
The contactors Conform to GB / T 14048.4 and IEC / en 60947-4-1.
- Description
- Inquiry
2. CJX2 AC Contactors Specification
| Type | CJX2-D09 | CJX2-D12 | CJX2-D18 | CJX2-D25 | CJX2-D32 | CJX2-D40 | CJX2-D50 | CJX2-D65 | CJX2-D80 | CJX2-D95 | |
| Rated workingcurrent (A) | AC3 | 9 | 12 | 18 | 25 | 32 | 40 | 50 | 65 | 80 | 95 |
| AC4 | 3.5 | 5 | 7.7 | 8.5 | 12 | 18.5 | 24 | 28 | 37 | 44 | |
| Standardpower ratingsof 3-phasemotors50/60Hz incategory AC-3 | 220/230V | 2.2 | 3 | 4 | 5.5 | 7.5 | 11 | 15 | 18.5 | 22 | 25 |
| 380/400V | 4 | 5.5 | 7.5 | 11 | 15 | 18.5 | 22 | 30 | 37 | 45 | |
| 415V | 4 | 5.5 | 9 | 11 | 15 | 22 | 25 | 37 | 45 | 45 | |
| 500V | 5.5 | 7.5 | 10 | 15 | 18.5 | 22 | 30 | 37 | 55 | 55 | |
| 660/690V | 5.5 | 7.5 | 10 | 15 | 18.5 | 30 | 33 | 37 | 45 | 55 | |
| Rated heat current (A) | 20 | 20 | 32 | 40 | 50 | 60 | 80 | 80 | 125 | 125 | |
| Electrical life | AC3 (x104) | 100 | 100 | 100 | 100 | 80 | 80 | 60 | 60 | 60 | 60 |
| AC4 (x104) | 20 | 20 | 20 | 20 | 20 | 15 | 15 | 15 | 10 | 10 | |
| Mechanical life (x104) | 1000 | 1000 | 1000 | 1000 | 800 | 800 | 800 | 800 | 600 | 600 | |
| Number of the contacts | 3P+NO | 3P+NC+NO | |||||||||
| 3P+NC | |||||||||||
| Type | CJX2-D115 | CJX2-D150 | CJX2-D170 | CJX2-D205 | CJX2-D245 | CJX2-D300 | CJX2-D410 | CJX2-D475 | CJX2-D620 | |
| Rated workingcurrent (A) | AC3 | 115 | 150 | 170 | 205 | 245 | 300 | 410 | 475 | 620 |
| AC4 | 52 | 60 | 75 | 85 | 105 | 117 | 138 | 147 | 180 | |
| Standard powerratings of 3-phase motors50/60Hz incategory AC-3 | 220/230V | 30 | 40 | 55 | 63 | 75 | 100 | 110 | 147 | 200 |
| 380/400V | 55 | 75 | 90 | 110 | 132 | 160 | 220 | 265 | 335 | |
| 415V | 59 | 80 | 100 | 110 | 132 | 180 | 220 | 280 | 375 | |
| 500V | 75 | 90 | 110 | 129 | 160 | 200 | 250 | 355 | 400 | |
| 660/690V | 80 | 100 | 110 | 129 | 160 | 220 | 280 | 355 | 450 | |
| Rated heat current (A) | 200 | 250 | 250 | 275 | 315 | 400 | 500 | 700 | 1000 | |
| Electrical life | AC3 (x104) | 200 | 60 | 60 | 50 | 50 | 50 | 30 | 30 | 20 |
| AC4 (x104) | 15 | 15 | 15 | 15 | 15 | 15 | 8 | 8 | 5 | |
| Mechanical life (x104) | 300 | 300 | 300 | 300 | 300 | 300 | 300 | 100 | 100 | 100 |
3.CJX2 AC Contactors Standard Control Circuit Voltage
| Volts | 24 | 42 | 48 | 110 | 220 | 230 | 240 | 380 | 400 | 415 | 440 | 500 | 600 |
| 50Hz | B5 | D5 | E5 | F5 | M5 | P5 | U5 | Q5 | V5 | N5 | R5 | S5 | Y5 |
| 60Hz | B6 | D6 | E6 | F6 | M6 | – | U6 | Q6 | – | – | R6 | – | – |
| 50/60Hz | B7 | D7 | E7 | F7 | M7 | P7 | U7 | Q7 | V7 | N7 | R7 | – | – |
4. CJX2 AC Contactors Outline and Mounting Dimension
| Type | A | B | C | D | E | a | b | Φ |
| CJX2-D09~12 | 47 | 76 | 82 | 113 | 133 | 34/35 | 50/60 | 4.5 |
| CJX2-D18 | 47 | 76 | 87 | 118 | 138 | 34/35 | 50/60 | 4.5 |
| CJX2-D25 | 57 | 86 | 95 | 126 | 146 | 40 | 48 | 4.5 |
| CJX2-D32 | 57 | 86 | 100 | 131 | 151 | 40 | 48 | 4.5 |
| CJX2-D40~65 | 77 | 129 | 116 | 145 | 165 | 40 | 100/110 | 6.5 |
| CJX2-D80~95 | 87 | 129 | 127 | 175 | 195 | 40 | 100/110 | 6.5 |
| Type | A | B | C | b1 | P | Q | S | Q1 | M | N | L | Φ | Ga | Ha |
| CJX2-D115 | 158 | 120 | 132 | 158 | 35 | 60 | 17 | 25 | 134 | 96.2 | 75 | M6 | – | – |
| CJX2-D150 | 158 | 120 | 132 | 158 | 35 | 60 | 17 | 25 | 134 | 96.2 | 75 | M6 | – | – |
| CJX2-D170 | 158 | 120 | 132 | 158 | 35 | 60 | 17 | 25 | 134 | 96.2 | 75 | M6 | – | – |
| CJX2-D205 | 168.5 | 174 | 181 | 137 | 40 | 69 | 20 | 59.4 | 154 | 127 | 113.5 | M8 | 80 | 120-106 |
| CJX2-D245 | 168.5 | 197 | 181 | 137 | 48 | 69 | 25 | 51.5 | 172 | 127 | 113.5 | M10 | 80 | 120-106 |
| CJX2-D300 | 213 | 206 | 219 | 145 | 48 | 91 | 25 | 74 | 181 | 158 | 145 | M10 | 80 | 120-106 |
| CJX2-D410 | 213 | 206 | 219 | 209 | 48 | 91 | 25 | 74 | 181 | 158 | 145 | M10 | 80 | 120-106 |
| CJX2-D475 | 233 | 238 | 232 | 209 | 55 | 108 | 30 | 77 | 208 | 172 | 146 | M10 | 80 | 180 |
| CJX2-D620 | 309 | 304 | 255 | 280 | 80 | 140 | 40 | 89 | 264 | 202 | 155 | M12 | 80 | 180 |
5. Auxiliary contact block
| Appellation | Type | |
| Auxiliary instantaneous contactor block,contactor I | LA1-DN10C |  |
| LA1-DN01C |
| Appellation | Type | |
| Auxiliary instantaneous contactor block,contactor II | LA1-DN11C |  |
| LA1-DN20C | ||
| LA1-DN02C |
| Appellation | Type | |
| Auxiliary instantaneous contactor block,contactor IV | LA1-DN40C |  |
| LA1-DN31C | ||
| LA1-DN22C | ||
| LA1-DN13C | ||
| LA1-DN04C |
| Appellation | Type | |
| Side-mounted auxiliary module | LA8-DN11C | |
| LA8-DN20C |
6. LA2 time delay auxiliary contact block
| Appellation | Type | |
| Auxiliary instantaneouscontactor block,contactor IV | 0.1…3S LA2-DT0 |  |
| 0.1…30S LA2-DT2 | ||
| 10…180S LA2-DT4 | ||
| 1…30S LA2-DS2 |
| Appellation | Type | |
| Time delay auxiliary contactorblock releasing and delay | 0.1…3S LA2-DT0 |  |
| 0.1…30S LA3-DT2 | ||
| 10…180S LA3-DT4 |
Related Products
Read MoreQuick ViewCJX2-K(LC1-K) mini contactor
CJX2-K(LC1-K) mini contactor is suitable for circuit and frequent starting speed to control AC motor. Adding contactor auxiliary contact group, living with appropriate thermal relay, can take action to protect circuit overload. It conforms to iec60947-4-1.
Read MoreQuick ViewCJX2-Z AC Contactors
CJX2-Z series DC operated AC contactor is suitable for use in the circuits up to rated voltage660V AC 50Hz or 60Hz, and in rated current 9-95A in AC-3/380V load circuits. For remotecontrolling circuit making, breaking and frequent starting AC motors. It can also combine withthe auxiliary contact group, air delayer, thermal relay devices etc.
Read MoreQuick ViewCJX2N AC magnetic contactor
CJX2N AC magnetic contactor (hereinafter referred to as Contactors) are mainly used for AC 50 Hz or 60 Hz rated voltage to 690 V and rated working current to 95 A under AC-3 usage category. The magnetic contactor are mainly used for frequently starting and controlling AC motor .
According to the standard: GB / T 14048.1/iec 60947-1, GB / T 14048.4/IEC 60947-4-1.
Read MoreQuick ViewCJX2-N Mechanical Interlocking Contactor(reversible contactor)
CJX2-N reversible contactor is mainly used for AC 50 Hz, rated insulation voltage to 1000 V, rated working current to 95 a line, to control the forward and reverse rotation of AC motor.
The reversible contactor composed of two CJX2 Contactor is interlocked by mechanical interlocking mechanism to ensure that the two contactors can not be pulled in at the same time and the normal forward and reverse rotation of AC motor; the mechanical interlocking mechanism has no effect on the action time of single AC contactor
Read MoreQuick ViewCJX1 AC Contactors
CJX1 < 3tf > electrical magetic contactor products are AC 50 Hz or 60 Hz. The magetic contactor rated insulation voltage is 690-1000v. Under the category of AC3, when the rated working voltage is 380V, the magnetic contactor rated working current is 9A-400A. The AC contactor is mainly used for remote connecting and breaking circuit.The electrical magetic contactor is suitable for controlling the starting of AC motor. Stop and reverse, The Contactor is in line with IEC947, VDE0660, GB14048 and other standards
Read MoreQuick ViewCJX2-F AC electrical contactor
CJX2-F AC electrical contactor is suitable for the circuit of AC 50 Hz or 60 Hz, voltage to 660 V and current from 115 A to 1000 a, which is used for remote connection and breaking circuit, frequent starting and control of AC motor. In addition, CJX2-F AC electrical contactor can be equipped with auxiliary contact group, air delay head, mechanical interlock and other accessories to form delay contactor, reversible contactor, star delta starter, and can be directly installed with thermal relay to form electromagnetic starter to protect overload circuit.
Read MoreQuick ViewCJ19 Changeover Capacitor Contactor
CJ19 series changeover contactor (hereinafter referred to as contactor) is mainly used for AC 50 Hz (or 60 Hz) and rated operation In the power line with voltage up to 690V.