SL10L-40 Residual Current Circuit Breaker with overcurrent protection (RCBO)

SM2 Moulded Case Circuit Breaker MCCB
SL2-63A RCD circuit breaker (Residual Current Circuit Breaker)
SL10L-40 rcbo circuit breaker

SL10L-40 Residual Current Circuit Breaker with overcurrent protection (RCBO)

SL10L-40 Residual Current Circuit Breaker with overcurrent protection (RCBO) have rated working voltage of 230V, rated working current of 40A,  and rated short-circuit breaking capacity of 4.5ka/6ka.

Read More
Categories: ,

  • Description
  • Inquiry

SL10L-40 Residual Current Circuit Breaker with overcurrent protection (RCBO) have rated working voltage of 230V, rated working current of 40A,  and rated short-circuit breaking capacity of 4.5ka/6ka.

SL10L-40 Residual Current Circuit Breaker with overcurrent protection (RCBO) is applicable to the line with AC 50 / 60Hz, rated voltage of 230V and rated current of 40A. It can be used as overload, short circuit and leakage protection, and can also be used as a switch to connect and disconnect the line.The SL10L-40 Residual Current Circuit Breaker with overcurrent protection (RCBO) is widely used in low-voltage terminal power distribution places such as industrial and commercial buildings and civil houses

SL10L-40 Residual Current Circuit Breaker 

1.  Protection against overload and short-circuit currents
2.  Protection against the effects of sinusoidal alternating earth fault currents
3.  Protection  against  indirect  contacts  and  additional  protection  against  direct contacts.
4.  Protection against fire hazard caused by insulation faults
5.  Used in residential building
6.  According to the type of instantaneous release classified as follows: type B(3-5)ln, type C(5-10)ln

SL10L-40 Residual Current Circuit Breaker  Specifications

 

TypeStandardlEC/EN 61009-1
Electrical featuresLeakage typeElectromagnetic type
Rated current InA6, 10, 16, 20, 25, 32, 40
Type (wave form of the earth leakage sensed)A, AC
PolesP1P+N
Rated voltage UeV230
Insulation voltage UiV500
Rated frequencyHz50/60
Rated breaking capacity  IcnA6000
Rated impulse withstand voltage (1.2/50) UimpV4000
Dielectric test voltage at ind. Freq. for 1minkV2
Rated sensitivity  IΔnA0.03, 0.05, 0.1
Break time under IΔns≤0.1
Rated residual making and breaking capacity IΔmA500
Pollution degree2
Mechanical featuresElectrical lifet4000
Mechanical lifet8000
Protection degreeIP20
Storage temperature℃-25~+70
Ambient temperature (with daily average≤35℃)℃-5~+40
InstallationTerminal connection typeCable/U-type bar/Pin-type busbar
Terminal size top / bottom for cablemm²16
AWG18-5
Terminal size top / bottom for busbarmm²16
AWG18-5
Tightening torqueN*m1.2
In-Ibs11
MountingOn DIN rail EN 60715(35mm)by means of fast clip device
Connection                                                                                                         From top and bottom

Contact Us






Related Products