JR28 Series Thermal Relay
JR28 series thermal overload relay (hereinafter referred to as thermal relay) is suitable for overload and open phase protection of AC motor with AC 50 Hz / 60 Hz, voltage to 690 V and current of 0.1-630A for long or intermittent operation.
The thermal relay also has the functions of temperature compensation, action indication, automatic manual reset, stop and so on. The product performance is stable and reliable.
The thermal relay meets the requirements of GB 14048.4, GB 14048.5, IEC 60947-4-1, etc.
The thermal relay can be connected with the contactor or installed independently
- Description
- Inquiry
1. Normal working condition
- Altitude: no more than 2000m.
- The ambient air temperature is – 50c – + 40 ℃, and the average temperature within 24h shall not exceed + 35 ℃.
- Atmospheric conditions: at + 40℃ The average minimum temperature of the wettest month is not more than + 25℃, and the average maximum relative humidity of the month is not more than 90%, and the condensation on products due to temperature change is considered.
- The pollution level is 3.
- The inclination between the mounting surface and the vertical surface shall not exceed 5 degree.
- In the medium without explosion hazard, and there is no gas and conductive dust that can corrode metal and destroy insulation.
- In places with rain proof equipment and not full of water vapor.
- There is no significant shaking, shock or vibration.
2. Motion Characteristic: Three-phase Balance Motion Time
| No | Times of the setting current | Motion time | Start condition | Ambient temperature | ||
| 1 | 1.05 | >2h | Cold state | 20±5oC | ||
| 2 | 1.2 | <2h | Heat state(Following the No.1 test) | |||
| 3 | 1.5 | <4min | ||||
| 4 | 7.2 | 10A | 2s< Tp≤10s | ≤63A | Cold state | |
| 10 | 4s< Tp≤10s | >63A | ||||
3. Phase-losing Motion Characteristic
| No | Times of the setting current | Motion time | Start condition | Ambienttemperature | |
| Any two phases | Another phase | ||||
| 1 | 1.0 | 0.9 | >2h | Cold state | 20±5oC |
| 2 | 1.15 | 0 | <2h | Heat state(Following the No.1 test) | |
4. Specification
| Type | Number | Setting range (A) | For contactor |
| JR28-25 | 1301 | 0.1~0.16 | CJX2-09~32 |
| 1302 | 0.16~0.25 | CJX2-09~32 | |
| 1303 | 0.25~0.4 | CJX2-09~32 | |
| 1304 | 0.4~0.63 | CJX2-09~32 | |
| 1305 | 0.63~1 | CJX2-09~32 | |
| 1306 | 1~1.6 | CJX2-09~32 | |
| 1307 | 1.6~2.5 | CJX2-09~32 | |
| 1308 | 2.5~4 | CJX2-09~32 | |
| 1310 | 4~6 | CJX2-09~32 | |
| 1312 | 5.5~8 | CJX2-09~32 | |
| 1314 | 7~10 | CJX2-09~32 | |
| 1316 | 9~13 | CJX2-09~32 | |
| 1321 | 12~18 | CJX2-09~32 | |
| 1322 | 17~25 | CJX2-32 | |
| JR28-36 | 2353 | 23~32 | CJX2-09~32 |
| 2355 | 30~40 | CJX2-09~32 | |
| JR28-93 | 3322 | 17~25 | CJX2-09~32 |
| 3353 | 23~32 | CJX2-09~32 | |
| 3355 | 30~40 | CJX2-09~32 | |
| 3357 | 37~50 | CJX2-09~32 | |
| 3359 | 48~65 | CJX2-09~32 | |
| 3361 | 55~70 | CJX2-09~32 | |
| 3363 | 63~80 | CJX2-09~32 | |
| 3365 | 80~93 | CJX2-95 | |
| JR28-150 | 4365 | 80~104 | CJX2-95 |
| 4367 | 95~120 | CJX2-95~115 | |
| 4369 | 110~140 | CJX2-115 |
| Type | Number | Setting range (A) | For contactor |
| JR28-150 | 5369 | 90~150 | CJX2-150 |
| JR28-200 | F5357 | 30~50 | CJX2-F115~F185 |
| F5363 | 48~80 | CJX2-F115~F185 | |
| F5367 | 60~100 | CJX2-F115~F185 | |
| F5369 | 90~150 | CJX2-F115~F185 | |
| JR28-630 | F5371 | 132~220 | CJX2-F225~F265 |
| F7375 | 200~330 | CJX2-F225~F500 | |
| F7379 | 300~500 | CJX2-F225~F500 | |
| F7381 | 380~630 | CJX2-F400~F630 |
5.JR28 Series Thermal Relay Overall and Mounting Dimensions
JR28-D13 Plugin type installation
JR28-D23 Plugin installation
JR28-D23 Stand-alone installation
JR28-D33 Plugin installation
JR28-D33 Stand-alone installation
LR9-F53 Stand-alone installation
LR9-F73 Stand-alone installation
Related Products
Read MoreQuick ViewCJX2-F AC electrical contactor
CJX2-F AC electrical contactor is suitable for the circuit of AC 50 Hz or 60 Hz, voltage to 660 V and current from 115 A to 1000 a, which is used for remote connection and breaking circuit, frequent starting and control of AC motor. In addition, CJX2-F AC electrical contactor can be equipped with auxiliary contact group, air delay head, mechanical interlock and other accessories to form delay contactor, reversible contactor, star delta starter, and can be directly installed with thermal relay to form electromagnetic starter to protect overload circuit.
Read MoreQuick ViewCJX2N AC magnetic contactor
CJX2N AC magnetic contactor (hereinafter referred to as Contactors) are mainly used for AC 50 Hz or 60 Hz rated voltage to 690 V and rated working current to 95 A under AC-3 usage category. The magnetic contactor are mainly used for frequently starting and controlling AC motor .
According to the standard: GB / T 14048.1/iec 60947-1, GB / T 14048.4/IEC 60947-4-1.
Read MoreQuick ViewCJX1 AC Contactors
CJX1 < 3tf > electrical magetic contactor products are AC 50 Hz or 60 Hz. The magetic contactor rated insulation voltage is 690-1000v. Under the category of AC3, when the rated working voltage is 380V, the magnetic contactor rated working current is 9A-400A. The AC contactor is mainly used for remote connecting and breaking circuit.The electrical magetic contactor is suitable for controlling the starting of AC motor. Stop and reverse, The Contactor is in line with IEC947, VDE0660, GB14048 and other standards
Read MoreQuick ViewCJ19 Changeover Capacitor Contactor
CJ19 series changeover contactor (hereinafter referred to as contactor) is mainly used for AC 50 Hz (or 60 Hz) and rated operation In the power line with voltage up to 690V.
Read MoreQuick ViewSVF330 Series Mini Type AC Drive
SVF330 Series Mini Type AC Drive are developed for general applications of small power and OEM market. It applies V/f control technology, making the functions of PID, multiple-speed step, DC braking, Modbus communication, as well as less installation spac
Read MoreQuick ViewCJX2-N Mechanical Interlocking Contactor(reversible contactor)
CJX2-N reversible contactor is mainly used for AC 50 Hz, rated insulation voltage to 1000 V, rated working current to 95 a line, to control the forward and reverse rotation of AC motor.
The reversible contactor composed of two CJX2 Contactor is interlocked by mechanical interlocking mechanism to ensure that the two contactors can not be pulled in at the same time and the normal forward and reverse rotation of AC motor; the mechanical interlocking mechanism has no effect on the action time of single AC contactor
Read MoreQuick ViewCJX2-K(LC1-K) mini contactor
CJX2-K(LC1-K) mini contactor is suitable for circuit and frequent starting speed to control AC motor. Adding contactor auxiliary contact group, living with appropriate thermal relay, can take action to protect circuit overload. It conforms to iec60947-4-1.
Read MoreQuick ViewJRS2(3UA) Series Thermal Relay
JRS2 (3UA) series thermal relay (bimetallic thermal overload relay)is suitable for AC 50 / 60Hz, voltage to 660-1000v, current to 630A long-term work or intermittent long-term work. thermal relay is generally used as motor thermal overload protection, with open phase protection, temperature compensation, trip indication function, automatic and manual reset, and can be connected with contactor. It can also be installed independently.
Read MoreQuick ViewSVF300 Series High Performance vector control frequency inverter
SVF300 series high Performance vector control frequency inverter is SEL Electrical developed the new type frequency inerter . General type and fan/pump type are in one model .
Read MoreQuick ViewJRS5 Series Thermal Relay
JRS5 thermal relay is suitable for overload protection of AC motor operated on 8-houres dutyor uninterupted duty. The overload protected AC motor with frequency 50Hz, voltage up to660V, current up to 105A. Several functions provided by these relays are: phase-failure protection,temperature compensation, ON/OFF indication and manual/automatic reset. The product con-forms to IEC60947-4-1 stardand.